IBM BROCADE 4 GB FC HBAS, Installation Manual

Page: 48 / 88

Table 2. Optional features (continued)
Optional feature Description
Brocade Advanced Security (Secure OS)
for IBM
Eserver
BladeCenter
Provides increased security for the Brocade 4
Gb SAN through encryption, digital
certificates, digital signatures, and various
access-control lists.
Brocade 10-port Upgrade for IBM
Eserver
BladeCenter
Upgrades the switch module from seven
internal ports and three external ports to 14
internal ports and six external ports.
Note: This feature is available only for the
Brocade 10-port 4 Gb version.
For information about these features, see the following documentation on the
switch module Support CD:
v
Fabric OS Administrator’s Guide
v
Fabric OS Command Reference Manual
v
Fabric OS MIB Reference Manual
v
Fabric OS System Error Message Reference Manual
v
Fabric Manager Administrator’s Guide
v
Fabric Watch Administrator’s Guide
v
Secure Fabric OS Administrator’s Guide
v
Web Tools Administrator’s Guide
To activate and use these optional software features, you must purchase the
corresponding license keys. To purchase and obtain a license key for an
optional feature, go to http://www.ibm.com/servers/eserver/bladecenter/or
call IBM. In the U.S. and Canada, call 1-800-IBM-SERV (1-800-426-7378). For all
other countries, see http://www.ibm.com/planetwide/ for support telephone
numbers. A license key will be provided through the Web site that is described
in the documentation that you receive after you purchase the feature.
Before you can upgrade and install a new license key, you must determine the
license identifier (ID) of the switch module. Use the Telnet program to log in to
the switch module as described in Chapter 4, “Configuring the switch module
through the Telnet interface,” on page 25, and run the licenseidshow
command to determine this value. Record the license ID value for future
reference. For information about this command, see the Brocade Fabric OS
Command Reference Manual .
To install an optional feature on the switch, you must add the corresponding
license to the list of current features for the switch. Use the Telnet program to
log in to the switch module as described in Chapter 4, “Configuring the switch
module through the Telnet interface,” on page 25, and run the licenseadd key
36
Brocade 4 Gb SAN Switch Module: Installation Guide