IBM BladeCenter HS22V, Installation And User Manual

Page: 59 / 108

ServeRAID
controller
Cable "B "
9. Orient the connector on the storage interface card with the CIOv expansion
connector on the system board; then, press the storage interface card into the
CIOv expansion connector.
10. Firmly press on the indicated locations to seat the storage interface card.
Note:
For device-driver and configuration information to complete the
installation of the expansion card, see the documentation that comes with the
storage interface card.
11. Install the backup battery for the storage interface card into DIMM connector
ten (see “Blade server connectors” on page 18 and “Installing a memory
module” on page 29).
DIMM 10
connector
Battery
Cable "B"
12. Install the backup-battery cable to the backup battery. The side of the cable
with the blue touchpoint should be oriented towards the center of the blade
server.
13. Orient the backup-battery cable so that it lays flat over the top of the heat sink
for microprocessor two.
Chapter 3. Installing options
43