IBM BJ0NJML - Service And Asset Management, Integration Manual

Page: 310 / 330

Inventory Collaboration Switches
296
Integration Guide
Inventory Collaboration Switches
Process
Control ID Description Value and Action Derivation of
System ID 1 Derivation of
System ID 2
INV Update inventory.
Used when creating issues, returns, or
miscellaneous receipts or adjustments.
Inventory must exist in this system.
0
1
Update inventory.
Do not update inventory.
INVTRANS or
MATUSETRANS INVENTORY
INVDEL Delete inventory.
Used when deleting externally owned
inventory.
Attention: If value is 1, the item-storeroom
will still exist on related open PRs, POs, RFQs,
work orders, and so on. This might result in
problems receiving/approving these lines.
0
1
Delete item if it passes normal system
validations.
Delete inventory without any validations
and delete INVBALANCES record for the
item.
“THISMX” INVENTORY
INVISS Enter item issues.
Used when issuing material.
0
1
Allow material issues for the inventory.
Do not allow material issues for the
inventory.
MATUSETRANS INVENTORY
INVISSR Enter item issue returns.
Used when returning material.
0
1
Allow material returns.
Do not allow issue returns for the material.
MATUSETRANS INVENTORY
INVISSWO Update work order actual cost, equipment
INVCOSTs.
Used when processing issues or returns.
Meant to handle system to system cases
where these updates will be done separately.
0
1
Update work order actual material cost ,
equipment INVCOST.
Do not update work order actual material
cost, equipment INVCOST.
MATUSETRANS WORKORDER
INVPHY Enter external physical counts.
Used when creating physical counts.
0
1
Allow physical count for the inventory.
Do not allow physical count for the
inventory.
INVTRANS INVENTORY