IBM Aptiva, Hardware Maintenance Manual, Page: 108 / 282

Repair Information 4-5
4. System board.
The system board is secured by screws on the inner wall of the chassis.
5. Bay 1.
This drive bay may accommodate a 5.25-inch half-high drive, such as
diskette, hard disk, tape, or CD-ROM drive. Normally, this bay holds the
factory-installed CD-ROM drive.
6. Bay 2.
This drive bay may accommodate a 5.25-inch half-high drive, such as
diskette, hard disk, tape or CD-ROM drive.
7. Bay 3.
This drive bay may accommodate a 5.25-inch half-high drive, such as
diskette, hard disk, tape or CD-ROM drive.
8. Bay 4.
This drive bay may accommodate a 3.5-inch slim drive, such as a diskette,
hard disk or tape drive. Normally, this bay holds a factory-installed
diskette drive.
9. Bay 5.
This drive bay may accommodate an internal 3.5-inch slim drive, such as a
hard disk drive.