IBM 8853L6U, Service Manual

Page: 107 / 146

v Follow the suggested actions in the order in which they are listed in the Action column until the problem
is solved.
v
See Chapter 3, “Parts listing, Types 1885 and 8853,” on page 15 to determine which components are CRUs
and which components are FRUs.
v If an action step is preceded by “(Trained service technician only),” that step must be performed only by a
trained service technician.
Symptom Action
The CD or DVD drive is
detected as /dev/sr0 by SUSE
Linux. (If the SUSE Linux
operating system is installed
remotely onto a blade server
that is not the current owner of
the media tray [CD or DVD
drive, diskette drive, and USB
port], SUSE Linux detects the
CD or DVD drive as /dev/sr0
instead of /dev/cdrom.)
Establish a link between /dev/sr0 and /dev/cdrom as follows:
1. Enter the following command:
rm /dev/cdrom; ln -s /dev/sr0 /dev/cdrom
2. Insert the following line in the /etc/fstab file:
/dev/cdrom /media/cdrom auto ro,noauto,user,exec 0 0
The CD or DVD drive is not
recognized after being switched
back to the blade server running
Windows
®
2000 Advanced
Server with SP3 applied. (When
the CD or DVD drive owned by
blade server x is switched to
another blade server, then is
switched back to blade server x ,
the operating system in blade
server x no longer recognizes
the CD or DVD drive. This
happens when you have not
safely stopped the drives before
switching ownership of the
media tray [CD or DVD drive,
diskette drive, and USB port]).
Note: Because the BladeCenter unit uses USB to communicate with the media
tray devices, switching ownership of the media tray to another blade server is the
same as disconnecting a USB device. Before you switch ownership of the CD or
DVD drive (media tray) to another blade server, safely stop the media tray devices
on the blade server that currently owns the media tray, as follows:
1. Double-click the Unplug/Eject Hardware icon in the Windows taskbar.
2. Select USB Floppy and click Stop .
3. Select USB Mass Storage Device and click Stop .
4. Click Close .
You can now safely switch ownership of the media tray to another blade server.
ServerGuide problems
v
Follow the suggested actions in the order in which they are listed in the Action column until the problem
is solved.
v See Chapter 3, “Parts listing, Types 1885 and 8853,” on page 15 to determine which components are CRUs
and which components are FRUs.
v
If an action step is preceded by “(Trained service technician only),” that step must be performed only by a
trained service technician.
Symptom Action
The ServerGuide
™
Setup and
Installation CD will not start.
1. Make sure that the CD or DVD drive is associated with the blade server that
you are configuring.
2. Make sure that the blade server supports the ServerGuide program.
3. If the startup (boot) sequence settings have been changed, make sure that the
CD or DVD drives are first in the startup sequence.
The operating-system
installation program
continuously loops.
Make more space available on the hard disk.
Chapter 5. Diagnostics
91