Note:
The 2980W high-efficiency power module comes with an integrated fan
pack.
2.
Make sure that the handle on the power module is in the open position.
3.
Orient the new power module to the selected power-module bay:
v
For the upper power-module bays, the rear connector on the power module
must be facing down.
v
For the lower power-module bays, the rear connector on the power module
must be facing up.
4.
Slide the module into the bay until it stops; then, push the handle to the closed
position.
5.
Install the bezel that was removed during the removal procedure (see
“Installing a bezel” on page 32).
38
BladeCenter H Type 8852, 7989, and 1886: Problem Determination and Service Guide
Summary of Contents for 8852 - BladeCenter H Rack-mountable
