IBM 8649 - Eserver xSeries 225, Maintenance And Troubleshooting Manual

Page: 123 / 194

Note: See “System replaceable units” on page 122 to determine which components should be replaced by a field
service technician.
Error code/symptom FRU/action
5962
(IDE CD-ROM drive configuration error)
1. Run the Configuration/Setup Utility program.
2. CD-ROM drive.
3. CD-ROM power cable.
4. IDE cable.
5. System board.
6. Battery.
8603
(Pointing-device error)
1. Pointing device.
2. System board
00012000
(Machine check architecture error.)
1. Microprocessor.
2. System board.
00019502
(Microprocessor 1 failed)
1. Microprocessor.
2. System board
00180100
(No room for PCI option ROM)
1. Run the Configuration/Setup Utility program.
2. Failing adapter.
3. System board.
00180200
(No more I/O space available for PCI
adapter.)
1. Run the Configuration/Setup Utility program.
2. Adapter.
3. System board.
00180300
(No more memory above 1MB for PCI
adapter.)
1. Run the Configuration/Setup Utility program.
2. Adapter.
3. System board.
00180400
(No memory below 1 MB for PCI adapter.)
1. Run the Configuration/Setup Utility program.
2. Adapter.
3. System board.
00180500
(PCI option ROM checksum error.)
1. PCI adapter.
2. System board.
00180600
(PCI device BIST failure. PCI bridge error.)
1. Run the Configuration/Setup Utility program.
2. Adapter.
3. System board.
00180700
(PCI device not responding.)
1. PCI adapter.
2. System board.
00181000
(General PCI error)
1. Adapter
2. System board
I9990650
(AC power has been restored)
1. Check cable.
2. Check for interruption of power.
3. Power cable.
Chapter 6. Symptom-to-FRU index
113