IBM 8649 - Eserver xSeries 225, Maintenance And Troubleshooting Manual

Page: 121 / 194

Note: See “System replaceable units” on page 122 to determine which components should be replaced by a field
service technician.
Error code/symptom FRU/action
162
(Device configuration error)
Note: Be sure to load the default settings
and any additional desired settings; then,
save the configuration .
1. Run the Configuration/Setup Utility program.
2. Battery.
3. Failing device.
4. System board.
163
(Real-time clock error)
1. Run the Configuration/Setup Utility program.
2. Battery.
3. System board.
164
(Memory configuration changed.)
1. Run the Configuration/Setup Utility program.
2. DIMM.
3. System board.
175
(EEPROM CRC #1 damaged.)
System board
184
(Power-on password damaged)
1. Run the Configuration/Setup Utility program.
2. System board.
185
(Drive startup sequence information
corrupted)
1. Run the Configuration/Setup Utility program.
2. System board.
187
(VPD serial number not set.)
1. Set serial number in the Configuration/Setup Utility program.
2. System board.
188
(EEPROM CRC #2 damaged.)
1. Run the Configuration/Setup Utility program.
2. System board.
189
(An attempt made to enter the system with
invalid passwords)
1. Run the Configuration/Setup Utility program.
2. System board.
201
(Memory test error.)
1. DIMM
2. System board
229
(Internal cache (L2) error)
1. Microprocessor
2. Optional microprocessor
289
(DIMM disabled by the user or system.)
1. Run the Configuration/Setup Utility program.
2. DIMM.
3. System board.
301
(Keyboard or keyboard controller error)
1. Keyboard
2. System board
303
(Keyboard controller error)
1. Replace the PS/2 keyboard with a USB keyboard.
2. System board.
602
(Invalid diskette boot record)
1. Diskette
2. Diskette drive
3. Drive cable
4. System board
Chapter 6. Symptom-to-FRU index
111