IBM 8275, User Manual

Page: 29 / 110

Table 3. MIBs Supported by the 8275-416 . (continued)
MIBs Supported
IEEE 802.3 Ethernet MIB (RFC 1643)
RMON MIB (RFC 1757)
IBM 8275-416 MIB
The SNMP-based application must specify the appropriate community name that
the 8275-416 is configured to support. Real-time trap messages can be configured
to be sent to designated trap receivers. All configuration information on the switch
has read/write access via SNMP. All status information is also available via SNMP.
See “Chapter 4. Using the Terminal Interface” on page 25 for details about SNMP
support for the 8275-416 .
Web-Based Management Interface
The 8275-416 has a Web server that supports HTTP 1.1 and HTML 3.2 or later.
The Web browser must support HTTP 1.1 or HTML 3.2 or later.
The Web interface provides an interface to access and change 8275-416
parameters. Menus similar to those available through the terminal interface are also
displayed by the Web browser. To access the 8275-416 from a Web browser, you
must have configured the IP information for the 8275-416 . You will need a valid log
in userid and password. The accepted userids and passwords are the same as
those configured for the terminal interface.
See “Chapter 5. Using the Web Interface” on page 61 for starting and using the web
interface.
Chapter 2. Accessing the 8275-416
15