IBM 8275, User Manual

Page: 67 / 110

Status:
Status can be Enable, Disable or Delete. Enable means that the user name
is authorized to access the 8275-416 . Disable means that the user name is
not allowed to access the 8275-416 . Delete means the user will be
removed from the list upon an apply or save.
System Utilities
The system utilities can be used only by users with read/write access. You can use
the system utilities by selecting System Utilities Menu on the Main Menu.
Figure 40 shows the available utilities.
Saving Applied Changes
There are two ways to save applied changes which result in the changes being
retained across a reset:
v
Pressing the F4 key.
v
Selecting Save Applied Changes on the System Utilities Menu.
You can permanently save configuration changes by pressing the F4 key or going
to the System Utilities Menu and selecting Save Applied Changes, as shown in
Figure 40.
Logging Out
When you have finished using the terminal interface, ensure you have saved and
applied all configuration changes before you Logout. The terminal interface provides
an orderly way to logout. One way is to use the Logout command on the Main
Menu. Another way to Logout is to select System Utilities Menu from the Main
menu, then select Logout as shown in Figure 41 on page 54.
Figure 40. Save Applied Changes Menu
Chapter 4. Using the Terminal Interface
53