IBM 8038, Installation And User Manual, Page: 46 / 104

a. Open the release lever on the microprocessor socket.
b. Open the microprocessor retainer.
Attention: Do not touch the connectors on the microprocessor and the
microprocessor socket.
10. Install the microprocessor in the microprocessor socket:
a. Touch the static-protective bag that contains the new microprocessor to
any
unpainted surface on the BladeCenter chassis or any unpainted metal
surface on any other grounded rack component; then, carefully remove the
microprocessor and the installation tool from the package.
b.
The microprocessor is preinstalled on the installation tool. Release the
sides of the cover and remove the cover from the installation tool.
Note: Do not touch the microprocessor contacts. Contaminants on the
microprocessor contacts, such as oil from your skin, can cause connection
failures between the contacts and the socket.
c. Align the installation tool with the microprocessor socket. The installation
tool rests flush on the socket only if properly aligned.
d.
Twist the handle on the microprocessor tool counterclockwise to insert the
microprocessor into the socket. The microprocessor is keyed to ensure that
the microprocessor is installed correctly. The microprocessor rests flush on
the socket only if properly installed.
32
BladeCenter HS23E Type 8038 and 8039: Installation and User's Guide