IBM 7379E2U, Installation And User Manual

Page: 69 / 152

Installing the fan cage assembly
Attention:
v
Replace a hot-swap fan within 30 seconds of removal.
v
To ensure proper cooling and airflow, do not operate the server for more than 30
minutes with the left-side cover removed.
To install the fan cage assembly, complete the following steps.
1. Align the fan cage assembly with the guide rails on the sides of the chassis.
Note: Make sure that both release buttons click into place.
2. Slide the fan cage assembly into the chassis and press firmly until the fan cage
is seated firmly in place.
3. Install the air baffle (see “Installing the air baffle” on page 52).
4. Rotate the power-supply cage assembly back into the server. Press the
power-supply release tab and rotate the power-supply cage assembly into the
chassis.
Chapter 2. Installing optional devices
53