IBM 7379E2U Installation And User Manual Download

Page: 133 / 152

4. From the

Product

list, select

IBM Systems Director

5. From the

Installed version

list, select the latest version, and click

Continue

6. Download the available updates.

7. Copy the downloaded files to the management server.

8. On the management server, on the Welcome page of the IBM Systems

Director Web interface, click the

Manage

tab, and click

Update Manager

9. Click

Import updates

and specify the location of the downloaded files that you

copied to the management server.

10. Return to the Welcome page of the Web interface, and click

View updates

11. Select the updates that you want to install, and click

Install

to start the

installation wizard.

Chapter 3. Configuring the server

117

Summary of Contents for 7379E2U

























































































































































Search results

Summary of Contents for 7379E2U

Reviews:

Related manuals for 7379E2U

Brands by name

Popular brands

IBM 7379E2U, Installation And User Manual

Search results

Summary of Contents for 7379E2U

Reviews:

Related manuals for 7379E2U

Brands by name

Popular brands