CONTENTS Table of Contents
COVER Book Cover
NOTICES Notices
EDITION Edition Notice
CONTENTS Table of Contents
FRONT_1 Notices
FRONT_1.1 Safety Notices
FRONT_1.1.1 Danger Notice
FRONT_1.1.2 Caution Notice
FRONT_1.1.3 Attention Notice
FRONT_1.2 End of Life (EOL) Plan
FRONT_1.3 Electronic Emission Notices
FRONT_1.4 Trademarks
FRONT_2 About This Guide
FRONT_2.1 Related Publications
1.0 Chapter 1. General Information
1.1 System Requirement
1.2 Enabling the 7208 Tape Drive as an IPL Device
1.3 Specifications
2.0 Chapter 2. Setting Up the 7208 Tape Drive
2.1 Performing the Installation
2.1.1 Step 1. Using the Inventory Checklist
2.1.2 Step 2. Checking the Electrical Outlets
2.1.3 Step 3. Assembling the Materials
2.1.4 Step 4. Setting the SCSI Address
2.1.5 Step 5. Placing the 7208 Tape Drive
2.1.6 Step 6. Performing a System Shutdown
2.1.7 Step 7. Connecting the SCSI Bus Cable
2.1.8 Step 8. Installing the SCSI Terminator
2.1.9 Step 9. Connecting the Power Cables
2.1.10 Step 10. Performing the 7208 Tape Drive Checkout Procedure
3.0 Chapter 3. Using the 7208 Tape Drive
3.1 Operator Controls
3.1.1 Power Switch
3.1.2 Unload Button
3.2 Indicator Lights
3.2.1 Power-On Light
3.2.2 Status Lights
3.3 Liquid Crystal Display
3.3.1 Changing the Display Language
3.4 Loading and Unloading Tape Cartridges
3.4.1 Loading a Tape Cartridge
3.4.2 Unloading a Tape Cartridge
3.5 Cleaning the Tape Drive
4.0 Chapter 4. Removing the 7208 Tape Drive
4.1 Removal Checklist
5.0 Chapter 5. Using the Media
5.1 Types of Tape Cartridges
5.2 Storage and Shipping Environments
5.3 Operating in Harsh Environments
5.4 Setting the Write-Protect Switch
5.5 Ordering Tape Cartridges
A.0 Appendix A. Power Cables
B.0 Appendix B. Fault Symptom Codes and Error Recovery Procedure Numbers
C.0 Appendix C. Error Recovery Procedures
BACK_1 Communicating Your Comments to IBM
COMMENTS Readers' Comments -- We'd Like to Hear from You
7208 Model 341 Setup and Operator Guide
Table of Contents
¦ Copyright IBM Corp. 1997
CONTENTS - 1
