IBM 6400 Series, Maintenance Manual

Page: 420 / 428

420 Index
044 EC FIRMWARE/HARDWARE
ERROR, 82
046 EC STOPPED AT STATE (state), 82
057 CLOSE PLATEN, 83
058 SHUTTLE JAM / SEE USER’S
GUIDE, 84
059 CANCEL PRINT ACTIVE, 85
060 PRINTER HOT, 85
062 EXHAUST FAN FAULT, 86
065 HAMMER BANK FAN FAULT, 86
069 DATA CLEARED, 87
080 POWER SUPPLY HOT, 87
081 POWER SUPPLY VOLTAGE
FAILURE, 88
082 POWER SUPPLY 8.5V FAILED, 88
083 INTAKE FAN FAULT, 89
084 POWER SUPPLY 48V FAILED, 89
085 CONTROLLER VOLTAGE, 90
087 PLATEN OPEN TIMEOUT / CLOSE
PLATEN, 91
088 CONTROLLER 23.5V, 92
089 RIBBON STALL, 92
090 SHUTTLE COVER OPEN / CLOSE
SHUTTLE COVER, 93
092 RIBBON DRIVER CIRCUIT, 93
101 UPPER DRIVER SHORT, 94
102 LOWER DRIVER SHORT, 94
105 HAMMER COIL (number) OPEN, 94
107 HAMMER COIL (number) HOT, 95
110 STACK OVERFLOW / SEE USER’S
GUIDE, 96
111 STACK UNDERFLOW / SEE USER’S
GUIDE, 96
112 UNDEFINED OPCODE / SEE USER’S
GUIDE, 96
113 PROTECTED INSTRUCTION / SEE
USER’S GUIDE, 96
114 ILLEGAL OPERAND ACCESS / SEE
USER’S GUIDE, 97
115 ILLEGAL INSTRUCTION ACCESS /
SEE USER’S GUIDE, 97
116 ILLEGAL EXTERNAL BUS ACCESS /
SEE USER’S GUIDE, 97
117 A TO D OVERRUN / SEE USER’S
GUIDE, 97
118 UNDEFINED INTERRUPT / SEE
USER’S GUIDE, 98
119 TCB CORRUPTED / SEE USER’S
GUIDE, 98
120 ACCESS NULL POINTER / SEE
USER’S GUIDE, 98
121 PAPER NOT AT SPEED / SEE
USER’S GUIDE, 98
122 PAPER NOT SCHEDULED / SEE
USER’S GUIDE, 99
123 PAPER BUSY TOO LONG / SEE
USER’S GUIDE, 99
124 PAPER FIFO OVERFLOW / SEE
USER’S GUIDE, 100
125 PAPER FIFO UNDERFLOW / SEE
USER’S GUIDE, 100
126 PAPER FEED BAD TABLE / SEE
USER’S GUIDE, 101
127 PAPER FEED ILLEGAL STATE / SEE
USER’S GUIDE, 101
128 PAPER FEED INVALID COMMAND /
SEE USER’S GUIDE, 101
129 PAPER FEED INVALID PARAMETER
/ SEE USER’S GUIDE, 102
130 PAPER FEED PARTLY ENERGIZED /
SEE USER’S GUIDE, 102
131 PAPER FEED INTERRUPT / SEE
USER’S GUIDE, 102
132 RIBBON INVALID COMMAND / SEE
USER’S GUIDE, 102
133 RIBBON INVALID STATE / SEE
USER’S GUIDE, 103
134 PLATEN INVALID COMMAND / SEE
USER’S GUIDE, 103
135 PLATEN INVALID STATE / SEE
USER’S GUIDE, 103
136 PLATEN INVALID PARAMETER / SEE
USER’S GUIDE, 103
137 SHUTTLE INVALID COMMAND / SEE
USER’S GUIDE, 104
138 SHUTTLE INVALID PARAMETER /
SEE USER’S GUIDE, 104