IBM 628791U - PC 300 GL, User Manual

Page: 96 / 176

Starting the Configuration/Setup Utility Program
When you restart the computer for the first time after working with most
options, a message may appear indicating that a configuration change has
occurred. If such a message appears, you are then prompted to enter the
Configuration/Setup Utility Program program to manually update the
configuration settings or to confirm and save the settings that were
automatically updated by the system programs.
After you change an option and restart the computer, the following screen
might appear.
à ð
POST Startup Error(s)
The following error(s) were detected when the system was
started:
162 Configuration Change Has Occurred
Select one of the following:
Continue
Exit Setup
á ñ
Note: Depending on the configuration changes that occurred, the error
message you see might be different from the one shown here. If the
preceding screen appears, select Continue until you reach the
Configuration/Setup Utility Program menu (see Chapter 5, “Using
the Configuration/Setup Utility Program” on page 29).
If the preceding screen does not appear, then see Chapter 5, “Using the
Configuration/Setup Utility Program” on page 29.
82
PC 300GL User Guide