IBM 622138U - IntelliStation Z - Pro 6221, User Manual

Page: 73 / 142

14. Replace the support bracket (see “Removing and installing the support
bracket” on page 33).
15. Replace the side cover (see “Replacing the side cover” on page 53).
16. Reconnect the external cables and power cords. Turn on the attached devices,
and turn on the computer.
Installing a security rope clip
To help prevent theft, you can add a security rope clip and cable to your computer.
Complete the following steps to install a rope clip:
1. Turn off the computer and all attached devices.
2. Disconnect all power cords; then disconnect all external cables.
3. Remove the side cover (see “Removing the side cover” on page 31).
4. Use a screwdriver to remove the two metal knockouts.
5. Insert the rope clip through the rear panel; then, attach and tighten the nuts.
6. Thread a cable through the rope clip and around an object that is not part of or
permanently secured to the building structure or foundation, and from which the
cable cannot be removed. Fasten the cable ends together with a lock. After you
add the security cable, be certain it does not interfere with other cables
connected to the computer.
Rope clip
7. If you have other options to install or remove, do so now.
8. Replace the side cover (see “Replacing the side cover” on page 53).
9. Reconnect the external cables and power cords. Turn on the attached devices,
and turn on the computer.
Chapter 4. Installing options
51