IBM 600E - ThinkPad 2645 - PII 400 MHz User Reference Download Page 40

Page: 40 / 191

Functions of Your Computer

The following window appears:

The Display Device buttons. Click on one of these buttons to

set the display output type to the LCD, external monitor (CRT),
or both.

The Power Scheme buttons change the preset power options.

The Launch Device Manager button displays the “System

Properties” window, where you can make a device available or
unavailable.

The Show Allocated Resources View button displays the

“Allocated Resources View” window, where you can check the
memory addresses and other allocation settings.

The Help button displays online help.

The Device buttons. Click on the button of your choice from

the window. If the device is enabled, the red indicator next to
the button is lit. Otherwise, it stays off.

IBM ThinkPad 600E User's Reference

All manuals and user guides at all-guides.com

Summary of Contents for 600E - ThinkPad 2645 - PII 400 MHz
































































































































































































Search results

Summary of Contents for 600E - ThinkPad 2645 - PII 400 MHz

Reviews:

Related manuals for 600E - ThinkPad 2645 - PII 400 MHz

Brands by name

Popular brands

IBM 600E - ThinkPad 2645 - PII 400 MHz, User Reference

Search results

Summary of Contents for 600E - ThinkPad 2645 - PII 400 MHz

Reviews:

Related manuals for 600E - ThinkPad 2645 - PII 400 MHz

Brands by name

Popular brands