Replacing an UltraslimBay Device
Warm-Swaping a Device in the UltraslimBay
Warm swap means to remove or reconnect a device when the
computer is in suspend mode. Warm swap is enabled as a default
for your computer.
To check whether warm swap is enabled, do as follows:
1
Start the ThinkPad Configuration program.
“ThinkPad Configuration Program” on page 25.
2
Click on UltraBay
(
).
3
Make sure that there is a check mark in the Enable IDE
device Hot/Warm Swap check box.
If there is no check mark, put a check mark in the box and
restart your computer to make the change effective.
To warm-swap a device in the UltraslimBay, enter the computer into
suspend mode; the swap the device.
Make sure that the bay LED is off when you remove the
UltraslimBay device.
Bay LED
(Bottom view)
90
IBM ThinkPad 600E User's Reference
All manuals and user guides at all-guides.com
