IBM 6.00E+04, User Manual

Page: 93 / 233

Chapter 4. Using System Management Services
Use the system management services menus to view information about your system or
partition, and to perform tasks such as setting a password, changing the boot list, and
setting the network parameters.
To start the text-based System Management Services, press the number 1 key on the
terminal or in the virtual terminal window on the HMC after the word keyboard appears
and before the word speaker appears. After the text-based System Management
Services starts, the following screen displays.
Main Menu
1 Select Language
2 Change Password Options
3 View Error Log
4 Setup Remote IPL (Initial Program Load)
5 Change SCSI Settings
6 Select Console
7 Select Boot Options
--------------------------------------------------------------------------------------------------
Navigation keys:
X = eXit System Management Services
--------------------------------------------------------------------------------------------------
Type the number of the menu item and press Enter or Select a Navigation key: _
Note: The System Management Services can also be started using the Service
Processor Boot Mode Menu. See page 44.
On all menus except the Main Menu, there are several navigation keys:
M Return to the main menu.
ESC Return to the previous menu.
X Exit the System Management Services and start the operating system.
If X is entered, you are asked to confirm your choice to exit the SMS menus
and start the operating system.
75