IBM 5887, Installing

Page: 73 / 96

Model 8202-E4D connector locations
Learn about connector locations on rack-mounted models.
The 8202-E4D server provides cable connector locations for the following enclosures:
v
Support for expansion units, as shown in the following figure, is as follows:
– The card installed in the C1 slot can contain two 12X double data rate (DDR) cable ports. However,
the C1 slot cannot provide both 12X DDR and PCIe cable ports.
– The server contains a serial-attached SCSI (SAS) port.
v
Support for disk drive enclosures, as shown in the following figure, is as follows:
– The server contains a SAS port.
v
Support for PCIe storage enclosures, as shown in the following figure, is as follows:
– The card installed in the C1 slot can contain two PCIe cable ports. However, the C1 slot cannot
provide both PCIe and 12X DDR cable ports.
– The server contains a SAS port.
Figure 57. Model 8202-E4C connections for expansion units, disk drive enclosures, and PCIe storage enclosures
Figure 58. Model 8202-E4D connections for expansion units, disk drive enclosures, and PCIe storage enclosures
Reference information
59