IBM 4610-TM6 - SureMark Printer TM6 Two-color Thermal..., User Manual

Page: 108 / 236

Document insert forms (Models TI1, TI2, TI3, TI4, TI8, TG3, and TG4
only)
The printers will accommodate single and multipart forms.
Single and multipart form specifications
Specification Value
Minimum width: 50 mm (2 in.)
Maximum thickness of multipart forms: 0.47 mm (0.0185 in.)
Maximum thickness of front sheet, multipart
forms:
0.08 mm (0.003 in.)
Minimum thickness of single-part form: 0.10 mm (0.004 in.)
Maximum thickness of single-part form: 0.2 mm (0.008 in.)
Weight range for single-part forms: 68 – 90 g/m ² (18 – 24 #)
For best reliability, paper grain should be in the direction that the paper is fed into the
printer.
Notes:
1. Test all forms in the printer to ensure acceptable performance prior to buying a
significant quantity. There should be no binding holes or other holes within
10mm (0.4 in.) from the right edge of the form.
2. Forms less than 0.15mm (0.006 in.) thick with the grain of the paper
perpendicular to the feed direction (short-grain paper) should not be used for
landscape printing.
Specifications for documents that can be flipped
Multipart forms and short-grain single-part forms are not supported.
Specification Value
Minimum form length: 80 mm (3.14 in.)
Maximum form length: 223 mm (8.78 in.)
Maximum form width: 102 mm (4 in.)
Paper weight: 75 – 95 g/m ²
Print ribbons (Models TI1, TI2, TI3, TI4, TI8, TG3, and TG4 only)
The ribbon is an Epson ERC-35 or equivalent. In addition to the Epson ERC-35 , the
Infotech RE35P ribbon was tested and approved for use in the SureMark printer.
The Infotech ribbon, order number RE35P, Black, is available from:
Infotech, Inc.
2215 29th Street SE #B-1
Grand Rapids, MI 49508
Phone: (616) 452-5444
Fax (616) 452-5499
Attention: Using an inferior grade of ribbon can affect print quality and the life of
printheads and the printer mechanism.
August 24, 2004
80
SureMark Printers User’s Guide
|||
||
||
|
| |
||
||
||
|
|
|
|
|
|
|
|||
||
||
||
||
|
|