IBM 330 Type 6577, User Manual

Page: 62 / 102

POST Message Description
1804 A PCI adapter has requested a memory address that is not available.
Action:
1. Make sure that any ISA legacy adapters are set correctly in the Configuration/Setup Utility program. If
the memory resources settings are not correct, change the settings. Setting the resources used by ISA
legacy adapters to Not available enables the Plug and Play function to configure around the legacy
adapters. For instructions on using the Configuration/Setup Utility program, see “Configuring Your
Personal Computer” on page 15.
2. If all memory addresses are being used by ISA legacy adapters, you might need to remove one to make
memory addresses available to the PCI adapter. For instructions on removing adapters, see Installing
Options in Your Personal Computer.
1805 A PCI adapter read-only memory (ROM) error occurred.
Action: Remove all PCI adapters.
If you can start the computer without the PCI adapters, reinstall each adapter, one at a time, and retest.
When an adapter causes a failure, replace it.
If the problem cannot be isolated and corrected, have the computer serviced.
1962 A boot sequence error occurred.
Action:
1. Make sure the adapter option is set correctly in the Configuration/Setup Utility program. If the setting
is not correct, change the setting. For instructions on using the Configuration/Setup Utility program,
see “Configuring Your Personal Computer” on page 15.
2. Make sure all adapters are installed correctly. For instructions on installing adapters, see Installing
Options in Your Personal Computer.
52
Using Your Personal Computer