IBM 326m - eServer - 7969, Installation Manual

Page: 16 / 82

The model number and serial number are on the ID label on the right mounting
bracket on the server, as shown in the following illustration.
Note: This illustration shows a small computer system interface (SCSI) model
server. A Serial ATA (SATA) non-hot-swap hard disk drive model is also
available. This illustration might differ slightly from your hardware.
ID label
See the Rack Installation Instructions document for complete rack installation and
removal instructions.
The IBM
Eserver
Documentation CD
The IBM
Eserver
Documentation CD contains documentation for your server in
Portable Document Format (PDF) and includes the IBM Documentation Browser to
help you find information quickly.
Hardware and software requirements
The IBM
Eserver
Documentation CD requires the following minimum hardware
and software:
v
Microsoft Windows NT 4.0 (with Service Pack 3 or later), Windows 2000, or Red
Hat Linux.
v
100 MHz microprocessor.
v
32 MB of RAM.
v Adobe Acrobat Reader 3.0 (or later) or xpdf, which comes with Linux operating
systems. Acrobat Reader software is included on the CD, and you can install it
when you run the Documentation Browser.
Using the Documentation Browser
Use the Documentation Browser to browse the contents of the CD, read brief
descriptions of the documents, and view documents using Adobe Acrobat Reader or
xpdf. The Documentation Browser automatically detects the regional settings in use
in your server and displays the documents in the language for that region (if
available). If a document is not available in the language for that region, the
English-language version is displayed.
2
eServer 326m Type 7969: Installation Guide