IBM 3112, Service Manual

Page: 54 / 184

bh1s.bk : bh1saids.doc 38 Thu Apr 20 12:42:16 1995
38
Service Manual
Diagnostics Mode Tests
Auto Clean
Auto Clean needs to be turned on if there is an unacceptable
amount of toner being deposited on the back of the page. When
Auto Clean is on, after printing the number of pages specified in
Auto Clean Frequency, the printer will pause the number of seconds
specified in Auto Clean Delay. This pause minimizes the toner
accumulating on the fuser cleaner.
1. Enter Diagnostics mode.
2. Select [PRINTER SETUP].
3. Select [Auto Clean].
4. Select [On] or [Off].
5. Press Return to return to Diagnostics mode main menu.
Auto Clean Frequency
This can be set from 10 to 255 pages with a default of 50.
1. Enter Diagnostics mode.
2. Select [PRINTER SETUP].
3. Select [Auto Clean Frequency].
4. Select [+] or [-] to display the frequency desired.
5. Select [Save].
6. Press Return to return to Diagnostics mode main menu.
Auto Clean Delay
This can be set from 1 to 60 seconds with a default of 1.
1. Enter Diagnostics mode.
2. Select [PRINTER SETUP].
3. Select [Auto Clean Delay].
4. Select [+] or [-] to display the delay desired.
5. Select [Save].
6. Press Return to return to Diagnostics mode main menu.