IBM 300GL Type 6275 User Manual Download Page 120

Page: 120 / 208

program files and data files. Refer to your operating-system documentation for
information about software backup.

2. Remove all media (diskettes, compact discs, tapes, and so on) from the drives.

3. Turn off the computer and all attached devices.

4. Unplug the power cords from electrical outlets.

5. Note where you have attached your cables to the rear of the computer; then

remove them.

6. If you saved the original shipping cartons and packing materials, use them to

pack the units. If you are using different cartons, cushion the units to avoid any
damage.

102

Using Your Personal Computer

Summary of Contents for 300GL Type 6275

















































































































































































































Search results

Summary of Contents for 300GL Type 6275

Reviews:

Related manuals for 300GL Type 6275

Brands by name

Popular brands

IBM 300GL Type 6275, User Manual

Search results

Summary of Contents for 300GL Type 6275

Reviews:

Related manuals for 300GL Type 6275

Brands by name

Popular brands