10
Remote Emergency Power Off Switch
The UPS can be de-energized with a Remote Emergency Power Off Switch. These switches are in-
stalled in situations where, for safety reasons, power to the loads must be quickly disconnected.
An electrical connection between Pin 1 and Pin 2 will initiate an immediate Power Off of the UPS.
The UPS will not restart until the connection is broken.
Note: Do not connect Pin 1 to any signal or chassis ground other than Pin 2. Unpredictable operation
may result.
Pin 1
(to UPS Pin 7)
Pin 2
(to UPS Pin 9)
To Remote Emergency
Power Off Switch
Male
Female
To Accessory or Host
System Cable
To UPS
