8
Connecting Equipment and Power to the UPS
3000XLV Model Rear Panel
INDEX ITEM
DESCRIPTION
1 & 2
Serial Port & USB Port
Power management software and interface kits can be used with the
UPS.
Use only interface kits supplied or approved by IBM.
Use the supplied serial cable to connect to the serial port. DO
NOT use a standard serial interface cable since it is incompatible
with the UPS connector.
Serial
and
USB ports cannot be used simultaneously.
3
Voltage Selection Switch
See
Setting the Nominal Voltage.
4
Site Wiring Fault LED
See
Troubleshooting.
5 Network
Port
See
Quick Installation Guide.
6
Network Reset Button
Reset the Embedded Network Module.
7
Extend Run Battery Pack Con-
nector
See
Extend Run Battery Pack Operation and Setup Guide.
8 Input
Cord
See
Startup.
9, 10 &
11
Outlet Banks 1, 2 & 3
Separate outlet banks are controlled by the Embedded Network
Module. See
Embedded Network Module CD.
12, 13 &
14
Circuit Breakers for Outlet Banks
1, 2 & 3
See
Troubleshooting.
3000XHV Model Rear Panel
INDEX* ITEM
DESCRIPTION
1
Input Circuit Breaker
See
Troubleshooting.
2 Input
Connector
See
Startup.
3, 4 & 5
Outlet Banks 1, 2 & 3
Separate outlet banks are controlled by the Embedded Network
Module. See
Embedded Network Module CD.
*Exceptions from the 3000XLV are noted here.
2
3
5
4
12
9
13
8
7
5
4
2
1
10
11
14
1
3
6
