IBM 300 Series 6268, Hardware Maintenance Manual

Page: 337 / 450

Ÿ
Select Utility
Ÿ
Select Asset EEPROM Backup
Ÿ
Follow instructions on screen.
Viewing the test log
Errors reported by the diagnostic test will be displayed by
the program as a failed test.
To view details of a failure or to view a list of test results,
do the following from any test category screen:
Ÿ
Press F3 to activate the log File
Ÿ
Press F3 again to save the file to diskette or F2 to
print the file.
Note
Type 6868/6878 computers use only RIMM memory
modules.
SIMM/DIMM/RIMM memory errors:
SIMM/DIMM/RIMM error messages issued by the IBM PC
Enhanced Diagnostics:
Message Failure Found Recommended
Actions
2xx-1y A memory error
was detected in
SIMM socket Y Replace the
SIMM in the
socket identified
by the last digit of
the error code.
Re-run the test.
If the same error
code occurs
again, replace
the system
board.
2xx-2y A memory error
was detected in
DIMM/RIMM
socket Y Replace the
DIMM/RIMM in
the socket
identified by the
last digit of the
error code.
Re-run the test.
If the same error
code occurs
again, replace
the system board
or where memory
is on the
processor card,
replace the
processor card.
IntelliStation - 6868/6878
327