IBM 28L2234, User Manual

Page: 26 / 66

If you select New, you will need your Windows 3.x
diskettes.
If you select Current, continue with the instructions on the
screen.
Using the audio-CD program for OS/2
To use the OS/2 audio utility:
1. Turn on the computer.
2. Load an audio CD into the CD tray.
3. Double-click Multimedia.
4. Double-click Compact Disc and follow the on-screen
instructions.
Using the audio-CD program for DOS
The DOS operating system does not have a built-in program for
playing audio CDs. To listen to audio CDs using DOS, you must use
the IBMCDPLY.EXE program that is included on your Option
Diskette. To use the program:
1. Be sure you have correctly installed the device drivers for the
IBM 2X/4X/24X CD-ReWritable Internal IDE Option Kit. For
further instructions on installing the device drivers, refer to
Appendix C, “Customizing device driver configuration settings”
on page 3-13.
The DOS audio playback software is installed on your hard disk
drive during the installation of the device drivers.
2. Go to a command prompt.
3. Type IBMCDPLY and press Enter.
4. The program will begin, and you will see a graphic that looks
like the control panel of a CD player. The controls are labeled
with text below each icon. Use your mouse to select the control
you want to use.
5. Press the F3 key to exit from the program.
Using a data CD
You can use a data CD to read data files, play games, or run
applications. The following instructions provide information on
reading data CDs using Windows 98, Windows 95, Windows NT 4.0,
Windows 3.x, OS/2, and DOS.
Using a data CD in Windows 98, Windows 95, or
Windows NT 4.0
To read from a data CD in Windows 98, Windows 95, or Windows
NT 4.0:
1. Turn on the computer.
2. Load a data CD into the CD tray.
3. Double-click My Computer.
4. Verify that the CD-ROM icon is displayed.
5. Double-click the CD-ROM icon to view the files located on the
CD.
2-8 IBM 2X/4X/24X CD-ReWritable Internal IDE Option Kit