IBM 28L2234, User Manual

Page: 23 / 66

Handle the CD by the edges or the center hole. Do not touch the
surface of the CD.
To remove dust or fingerprints, wipe the CD from the center to
the edge with a soft, lint-free cloth.
Do not write on the surface.
Do not place the CD in direct sunlight.
Do not use commercial cleaners to clean the CD.
Do not bend the CD.
Loading a CD
To load a CD into a drive in a horizontal bay:
1. Press the Eject/Load button. The tray slides out of the drive.
2. Place the CD in the tray with the label facing up.
3. Close the tray by pressing the Eject/Load button, or by gently
pushing the tray in.
Attention: Do not use force or insert foreign objects to open the
CD tray.
If you have mounted your CD-ReWritable drive in a vertical bay,
consult the following illustration to determine which kind of loading
tray your drive has.
If the tray looks like the figure on the left, go to “Securing a CD
in a tray with rotating clips” on page 2-6.
If the tray looks like the figure on the right, go to “Securing a
CD in a tray with pullout clips” on page 2-6.
Part 2: User’s guide 2-5