Note:
The N7x50T series storage system has no requirement or provision for grounding.
Connecting the N7x50T series gateway to a network
Use the following information to connect the N7x50T series gateway to a network.
Figure 8 on page 10 identifies the ports on your N7x50T series gateway. Refer to Figure 8 on page 10 for
information about how to connect the gateway to the network. Refer to Figure 9 on page 11 for
information about how to connect the N7x50T series gateway to the network in Clustered Data ONTAP.
Refer to the
Gateway Implementation Guide
for your storage subsystem and review the following planning
and setup information for information about how to connect and boot your gateway. For details about
how to connect cables to management and cluster switches, see
Clustered Data ONTAP Switch Setup and
Configuration Guide
.
Note:
Use the cable management arms and hook-and-loop fasteners to organize your cabling.
n620024
Installation and setup instructions
9
