4.3
Connect the Remote Management port to the network (if applicable).
The Remote Management port gives you the capability to remotely
manage your system from anywhere within a network connection. See the
for Remote Management
configuration information.
The network for remote management must negotiate down to
10/100 or auto-negotiate.
Note:
Data ONTAP System Administration Guide
Important:
Attention:
Do not change the system ID when you set the disk shelf IDs.
Use the factory setting for the system ID and set your disk shelf IDs
accordingly.
4.4
Make sure that SFPs are installed and firmly seated in the Fibre Channel
ports (0a through 0b) of the system and the In port of the first expansion
unit of the loop(s) before attaching a Fibre Channel cable.
10