IBM 2790, Manual

Page: 65 / 88

is the terminal ID or Monitor key data. See Figure 35 to
determine the proper column number to be checked.)
Digit Value. Enter the value of the digit found in the
Position column. The digit value may be 0 through 9.
Guidance. Enter the guidance light to be used for operator
instruction in case the digit is not correct.
Multiple Entries (Area Station Only)
Enter an M in this column if this data entry is to accom­
modate an unknown number of cards, badges, or manual
entries.
Message Text
If stored text has been checked under ‘1053 printer’, enter
the message text. From 1 to 127 characters may be
specified.
Programming Considerations 65