Note: Signal lines, not used in these steps, are used
for communications between the system and
the battery.
3. If the voltage is less than +8 V dc, recharge the
battery pack.
If the voltage is still less than +8 V dc after
recharging, replace the battery.
Terminal
Signal / Voltage (V dc)
3
Reserved
4
Reserved
5
Thermal
6
Sense
7
Ground
System Board Check
The system board performs processing functions. Thus,
the system board can cause processor problems. To verify
the problem, do the following:
1. Boot from the diagnostics diskette and start the PQA
program (please refer to “Running the PQA Diagnos-
tics Program” on page 49).
2. Run the System Board test to verify the symptom.
This test verifies both the system board and the
processor board.
If the tests detect a system board problem, replace the
system board.
Note: Don't touch the keyboard and pointing device when
the system board test is running. This may cause
an unexpected error.
Memory Check
DIMM are available for increasing memory capacity.
DIMM
DIMM
Total Memory
32MB
0MB
32MB
0MB
32MB
32MB
32MB
32MB
64MB
64MB
0MB
64MB
0MB
64MB
64MB
64MB
32MB
96MB
32MB
64MB
96MB
64MB
64MB
128MB
128MB
0MB
128MB
0MB
128MB
128MB
128MB
32MB
160MB
ThinkPad i Series 1400 (Part I)
27
Summary of Contents for 2611-40A
