IBM 22P6972, User Manual

Page: 30 / 46

Enabling DMA for Windows XP
To change the DMA parameter setting from the Windows XP desktop, do the following:
1.
Click Start
2. Click Control Panel .
3. Click Switch to classic view .
4. Double-click System .
5. Click the Hardware tab.
6. Click the Device Manager button.
7. Click the IDE ATA/ATAPI controller to expand the tree.
8. Double-click on the controller where your Multi-Burner is located ( Primary IDE or Secondary IDE ).
9. Click the Advanced Settings tab.
10. Select the appropriate Transfer Mode pull-down that corresponds to the Multi-Burner location,
( Device 0 for Master, Device 1 for Slave)
11. Select DMA if it is available.
12. Click OK .
C-2
IBM Multi-Burner User’s Guide