IBM 22P6415, User Manual

Page: 19 / 62

Block or Allow: You can list specific MAC addresses to block or allow in this
window. Blocking a specific MAC address will allow everyone else with the
correct settings to access the LAN and the Gateway. Allowing a specific MAC
address will allow only that MAC address access to the LAN and Gateway as
long as WEP and ESSID are correct.
Wireless Settings - Status Monitor
The Status monitor is an advanced function for experts only. Click Status
monitor in the left-hand navigation bar to display the following window.
IEEE 802.11b Wireless LAN Access Point General
Information
v
MAC Address (BSS ID): 00-00-00-00-00-00
v
Frequency Domain
v
Statistics
v
Wireless Transmit
v
Wireless Receive
v
Fragments: 0
v
Fragments: 0
v
Unicast Packets: 0
v
Unicast Packets: 0
v
Unicast Bytes: 0
v
Unicast Bytes: 0
Part 3: Setting up the wireless access point in the IBM High Rate Wireless LAN Gateway
3-5