6
Fitting the Aptiva S series stand
1 Align the stand interface with the monitor as shown in the diagram so
that the horseshoe connector fits into the matching slot in the bowl.
2 Push the interface back until you hear a loud click which shows it is
locked in place.
3 Turn the interface 90° counter clockwise as shown in the next
diagram.
4 Unpack the tubular stand from the box containing your Aptiva S
series computer.
5 Position the stand as shown in the diagram and push firmly until it
clicks into place.
For Aptiva S series computers.
Your monitor is designed to sit on a
stand which is packed in the box
containing your Aptiva S series
computer. The interface for this stand
is packed with the monitor.
The tilt/swivel stand is not required for
Aptiva S series computers.
USMM75Bk.book : Emm75bod.fm Page 6 Friday, September 12, 1997 7:30 PM
