19
ENGLISH
FRANÇAIS
ESPAÑOL
POR
TUGUESE
APPENDIX
No Sound
Current program
does not use sound
None.
Volume set too low
Increase the volume using the rotary
volume control or OSD.
The sound may be
muted
Press button 5 once or adjust the rotary
volume control.
See
User Controls
on
page 8
If the sound was muted via a software
program, you must use this again to
restore sound.
No audio signal from
the computer
Check the audio cables have been
properly connected to the computer.
See
Connecting
your monitor
on page
7
Faulty audio system
in the computer.
Have the computer audio system checked
out.
Sound seems
distorted
Volume set too high
Decrease volume using the volume rotary
control.
Sound from only
one speaker
Incorrect balance
setting
Adjust using OSD balance control.
See
User Controls
on
page 8
No sound
symbols in the
OSD
The Aptiva sound
system is not in use
Activate the Aptiva sound system program
See your
Computer
System Documentation
The monitor is not attached to an Aptiva L or S series computer.
Sound controls
not working
Computer is running an application which is not supported by
the Aptiva Sound System, such as a DOS program.
Sound coming
from speakers
after monitor has
been switched off
Audio program is still running in the computer
Problem
Possible Cause
Suggested Action
Reference
USMM75Bk.book : Emm75bod.fm Page 19 Friday, September 12, 1997 7:30 PM