background image

 Trademarks

IBM, the IBM logo, and ibm.com

®

 are trademarks or registered trademarks of International Business Machines Corp., registered in

many jurisdictions worldwide. Other product and service names might be trademarks of IBM or other companies. The current list of IBM

trademarks is available on the web at Copyright and trademark information at www.ibm.com/legal/copytrade.html.

 Homologation statement

This product may not be certified in your country for connection by any means whatsoever to interfaces of public telecommunications

networks. Further certification may be required by law prior to making any such connection. Contact an IBM representative or reseller for

any questions.

 Electromagnetic compatibility notices

The following Class A statements apply to IBM products and their features unless designated as electromagnetic compatibility (EMC) Class

B in the feature information.
When attaching a monitor to the equipment, you must use the designated monitor cable and any interference suppression devices that are

supplied with the monitor.

 Canada Notice

CAN ICES-3 (A)/NMB-3(A)

 European Community and Morocco Notice

This product is in conformity with the protection requirements of Directive 2014/30/EU of the European Parliament and of the Council on

the harmonization of the laws of the Member States relating to electromagnetic compatibility. IBM cannot accept responsibility for any

failure to satisfy the protection requirements resulting from a non-recommended modification of the product, including the fitting of non-

IBM option cards.
This product may cause interference if used in residential areas. Such use must be avoided unless the user takes special measures to

reduce electromagnetic emissions to prevent interference to the reception of radio and television broadcasts.

Warning: 

 This equipment is compliant with Class A of CISPR 32. In a residential environment this equipment may cause radio

interference.

 Germany Notice

Deutschsprachiger EU Hinweis: Hinweis für Geräte der Klasse A EU-Richtlinie zur Elektromagnetischen Verträglichkeit

Dieses Produkt entspricht den Schutzanforderungen der EU-Richtlinie 2014/30/EU zur Angleichung der Rechtsvorschriften über die

elektromagnetische Verträglichkeit in den EU-Mitgliedsstaatenund hält die Grenzwerte der EN 55032 Klasse A ein.
Um dieses sicherzustellen, sind die Geräte wie in den Handbüchern beschrieben zu installieren und zu betreiben. Des Weiteren

dürfen auch nur von der IBM empfohlene Kabel angeschlossen werden. IBM übernimmt keine Verantwortung für die Einhaltung der

Schutzanforderungen, wenn das Produkt ohne Zustimmung von IBM verändert bzw. wenn Erweiterungskomponenten von Fremdherstellern

ohne Empfehlung von IBM gesteckt/eingebaut werden.
EN 55032 Klasse A Geräte müssen mit folgendem Warnhinweis versehen werden:

"Warnung: Dieses ist eine Einrichtung der Klasse A. Diese Einrichtung kann im Wohnbereich Funk-Störungen verursachen; in diesem Fall

kann vom Betreiber verlangt werden, angemessene Maßnahmen zu ergreifen und dafür aufzukommen."

Deutschland: Einhaltung des Gesetzes über die elektromagnetische Verträglichkeit von Geräten

Dieses Produkt entspricht dem "Gesetz über die elektromagnetische Verträglichkeit von Geräten (EMVG)." Dies ist die Umsetzung der EU-

Richtlinie 2014/30/EU in der Bundesrepublik Deutschland.

Zulassungsbescheinigung laut dem Deutschen Gesetz über die elektromagnetische Verträglichkeit von Geräten (EMVG) (bzw. der

EMC Richtlinie 2014/30/EU) für Geräte der Klasse A

Dieses Gerät ist berechtigt, in Übereinstimmung mit dem Deutschen EMVG das EG-Konformitätszeichen - CE - zu führen.
Verantwortlich für die Einhaltung der EMV-Vorschriften ist der Hersteller:

International Business Machines Corp.

New Orchard Road

Armonk, New York 10504

Tel: 914-499-1900

Summary of Contents for 2076-824





















Reviews: