IBM 2 Gigabit Fibre Channel PCI-X Adapter 5704, Installation And Using Manual

Page: 18 / 46

13. Repeat steps 10 through 12 for:
devices.common.IBM.fc
14. Repeat steps 10 through 12 for each of any other device drivers you need to install.
Examples of additional device drivers for other devices you may be installing include:
v
devices.fcp.disk
v
devices.fcp.tape
v
devices.fcp.disk.array
15. Press Enter. The Install Additional Device Software menu displays again. The entry data fields are
automatically updated. Press Enter to accept the values.
16. The ARE YOU SURE pop-up window displays. Press Enter to continue with the installation.
17. The COMMAND STATUS is displayed. After the installation process has completed, OK will be
displayed. Scroll to the bottom to view the results to ensure that the installation was successful.
18. Remove the installation media from the drive.
19. Press F10 to exit SMIT.
20. Proceed to Chapter 5, “Installing the Gigabit Fibre Channel PCI Adapter,” on page 15.
8
Gigabit Fibre Channel PCI Adapter Installation and Using Guide