![background image](http://html1.mh-extra.com/html/ibm/1735-4gx/1735-4gx_installation-and-user-manual_609073095.webp)
Chapter 4: Using the OSCAR interface
79
Figure 4.18: Scan window
3.
The window contains a listing of all target devices that are attached to the appliance. To select
target devices to be scanned, complete one of the following steps:
•
Select the check box next to the target devices that you want to scan.
•
Double-click on a target device name or port.
•
Press
Alt
and the eID number of the target device that you want to scan. You can select up
to 16 target devices from the list.
4.
In the
Time
field, type the number of seconds (from 3 to 255) of time before the scan moves to
the next target device in the sequence.
5.
Click
OK
.
To remove a target device from the scan list, complete the following steps:
1.
To select a target device to be removed from the scan list, complete one of the following steps:
•
In the Scan window, clear the check box next to the target device to be removed.
•
Double-click on the target device name or port.
•
Press
Shift
+
Delete
to remove the selected target device and all entries below it.
•
Click the
Clear
button to remove all target devices from the scan list.
2.
Click
OK
.
To start the Scan mode, complete the following steps:
1.
Start the OSCAR interface.
2.
Click
Commands
. The Commands window opens.
3.
Select
Scan Enable
in the Commands window. Scanning will begin immediately.
4.
Click
X
to close the Commands window.
Summary of Contents for 1735-4GX
