IBM 11000VA LCD 5U Rack Uninterruptible Power Supply
2
About uninterruptible power supplies
A UPS is a device that acts as a defensive barrier between electronic equipment and incoming power
problems. It conditions, regulates, and filters out power disturbances to ensure a clean power source for
IT equipment. A UPS also provides battery backup in the event of a power failure.
In today’s high-availability server environments, unplanned power outages or line quality irregularities can
have a considerable financial impact on businesses of all sizes. The typical utility power is 99.9%
available, but that means that there can be almost nine hours of downtime a year, not to mention
brownouts and other power quality problems. Selecting the right IBM UPS can help protect against these
potentially costly incidents.
The IBM 11000VA UPS is designed to prevent blackouts, brownouts, sags, and surges from reaching
your servers and other valuable electronic equipment. The UPS filters small utility line fluctuations and
isolates your equipment from large disturbances by internally disconnecting from the utility line. The UPS
provides continuous power from its internal battery until the utility line returns to safe levels or the battery
is fully discharged. The UPS has selectable high efficiency and double conversion modes of operation.
The IBM 11000VA UPS continuously conditions and controls AC output during normal operating
conditions, regulating both voltage and frequency. Even when presented with severe power problems,
UPS output remains within 2% of nominal voltage.
Part number information
Table 1 lists the orderable part numbers and feature codes for the IBM 11000VA UPS.
Table 1. Ordering part numbers and feature codes
Description
Part number
Feature code
IBM 11000VA LCD 5U Rack UPS (208V/230V)
5395-9KX
5395-RU5 (FC 6662)
IBM 11000VA UPS 3U Extended Battery Module (EBM)
69Y1986
5395-RU5 (FC 5735)
IBM LCD UPS Network Management Card (optional)
46M4110
6145
IBM LCD UPS Environmental Monitoring Probe (optional)
46M4113
6146
The UPS models include the following items:
An accessory kit containing the following items:
z
Front bezel
z
Rack mount kit with rails and hardware, including 4-post rail kit
z
Serial cable (3.7 m, 12 ft)
z
USB cable
z
Remote emergency power-off (REPO) connector
z
A documentation kit containing the following items:
z
Warranty flyer and Important Notices Manual
z
Documentation CD
z
Software CD, which contains IBM UPS Manager power management software
z
