![background image](http://html1.mh-extra.com/html/ibis/new-ripley/new-ripley_instruction-book_3283225025.webp)
47
46
WorKIng on tHe rIPley
This information is shown in a video:
http://tinyurl.com/n8f9o4p
Should you find it necessary to replace any of the bearings on the
Ripley eccentric linkages, you will need to remove the swingarm.
For that, you will need the following tools:
• 12mm open end wrench • 2 x 6mm Allen wrench
• 1 x 5mm Allen wrench
• 2 x 4mm Allen wrenches
BearIng rePlaceMent
Please refer to the section on Ripley Swingarm Removal on
pages 56-58.
Complete instructions can be found on this video:
http://tinyurl.com/n8f9o4p
or on our website at
http://www.ibiscycles.com/support/technical_articles/
ripley_bearing_replacement/
rIPley BearIng sPecs
Eccentric Core Inner Bearings:
• 6806-2RS (30 x 42 x 7)
These are the same as BB30 bearings.
Lower Outer Bearings:
• 608-RS 8x22x7
These mount in the swingarm
and can be found in skate shops.
Upper Outerbearing:
• 698-RS 8x19x6
These mount in the swingarm
and can be found in skate shops.
BearIng MaIntenance and rePlaceMent
WorKIng on Mojo Hd3 / Mojo 3
The linkage assemblies on the Mojo HD3 and Mojo 3 are designed
to be removed and replaced easily. Be sure to purchase a fresh
link set before removing the old ones to skip any downtime. There
are no bearings to press out, nor any axles to hammer. Upper and
lower pivot assemblies are available in the buy section of our
website, or you can have your dealer order them from Ibis for you.
Replacement is super simple and requires these common tools:
• 2x 4mm Allen wrenches • 2x 6mm Allen wrenches
• 2x 5mm Allen wrenches • Loctite 243 (or 242) blue thread locker
rePlacIng lInKages
Please refer to the section on Mojo HD3 and Mojo 3 Swingarm
Removal in this manual on
pages 60–61.
BearIng rePlaceMent
If you’re handy with a bench vice and have a good supply of
sockets, you can attempt the replacement of the bearings in the
upper and lower link yourself. While we don’t have step–by–step
instructions, you are welcome to purchase the bearings and try
it yourself.
Mojo Hd3 / Mojo 3 BearIng sPecs
The lower links use DDR1526 bearings on the drive side and 6902rs
on the non-drive side.
The upper links are 6800rs all around.
BearIng KIts
Enduro Bearing kits are available for all modern Ibis suspension
bikes at
http://www.enduroforkseals.com/id245.html
BearIng MaIntenance and rePlaceMent
M
a
IN
Ta
IN
M
a
IN
Ta
IN