12
Display Example #1
After powering up your Ibex SUMMIT for the first time, the Main Screen, as shown in Display
Example #1 above, should be showing. If some other screen is displaying instead, touch the Cancel or
OK button. This will bring you to the previous screen. Keep touching Cancel or OK until the above
screen appears.
If there is no screen showing but the display is a light blue color, shut the power off, wait about 10
seconds and turn the power back on. If no screen persists after two attempts, call Ibex Dental
Technologies service for assistance at 1-877-370-4242
The main screen offers four menu buttons plus door control.
1.
Porcelain – Touching this button will bring you to the Select Program screen where you can
perform all the required program functions, such as creating, editing and running programs.
2.
Utilities – Touching this button brings you to the main utilities screen. Here you can set the
user parameters to customize the furnace’s operation to your requirements.
3.
Sintering – “METAL SINTERING ONLY” - This button will bring you to a quick, easy to
use metal sintering program. NOTE! This is not for zirconia sintering.
4.
Night Mode – Touch this button to go into Night Mode immediately. This overrides the
time setting in the Night Mode and Features utilities.
NOTE!
Proceed to the
Utilities Menu
screen to program furnace settings prior to creating and firing
any programs.
The Main Screen
08/13/12
04:15:45
IDT Dental Tech.
450 C
0 cmHg
Porcelain
Sintering
Utilities
Night Mode
Door
Summary of Contents for SUMMIT
Page 10: ...10 Photo 3 ...