Iberital 1 series, Operation Manual

Page: 5 / 38

IBERITAL DE RECAMBIOS, S.A.
Page 4 of 22 manual electr.ce ingles 22-11-2004.doc
If the above is not respected the safety of the machine could be dangerous.
The connection to the mains must be carried out using a circuit breaker that conform to the
local safety standards and regulations in force.
9) During the installation the machine must be provided with a suitable automatic circuit
breaker which leaves a gap equal to or greater than 3 mm between its contacts.
10) In order to avoid dangerous overheating make sure that the power cord is completely
extended throughout its length.
11) The power cable must not be replaced by the user, if damage to the cable is noticed,
disconnect the machine from the mains and contact a technically qualified person authorized
by IBERITAL.
12) Whenever the machine is not to be used for extended periods make sure it is disconnected
from the mains.
In order to guarantee the continued efficiency of the machine and its correct functioning it is
indispensable that the manufacturer's instructions be followed and the periodic maintenance be
carried out by professionally qualified person.
In particular it is recommended that the safety devices of the machine be periodically
checked.
Do not allow naked hands or other parts of the body to come close to the coffee
dispensing spout or the hot water or steam jets.
The water and steam escaping from the jets is extremely hot and cause burns.
The water jets, steam jets and the filter bowl are extremely hot during normal working
conditions. They must therefore be used with care and only gripped by the handless.
Make sure that the coffee cups are free of water before placing them on the cup
warning shelf.
Only crockery which is specific to this machine should be placed on the cup warning
shelf. In case of doubt, contact your sales center.
The placing of any other objects is therefore to be considered improper and dangerous.