iBell IBL SG60-26, Operator'S Manual, Page: 7 / 16

6
WARNING!
Misuse or failure to follow the safety rules stated in
this instruction manual may cause serious personal injury.

This power tool is intended for use with only water-based or
mineral spirit-type materials with a minimum flash point of
38ºC.
Do not spray or clean with liquids having a flash point of
less than 38ºC.
(Flash point is the temperature at which a fluid can
produce enough vapour to ignite)

Do not use the product for spraying flammable materials. Do
not spray flammable or combustible materials near an open flame,
pilot lights or sources of ignition such as hot objects, cigarettes,
motors, electrical equipment and electrical appliances.
Be aware
of any hazards presented by the material being sprayed.

Use appropriate personal protective equipment, such as dust
mask, safety goggles, protective gloves and ear protection.
Do not
allow children to play with the product.

Keep spray area well ventilated . Keep a good supply of fresh air
moving through the area to keep the air within the area free from
accumulation of flammable vapours
. Keep spray area clean and
free of paint or solvent containers and other flammable materials.

Never allow the spray to come in direct contact with the skin.
Never under any circumstances aim the nozzle at another person.

Switch off and disconnect from the power supply if there are
malfunctions
. Have the gun checked by a qualified professional
and repaired, if necessary, before you operate it again.

Always be alert when using this product, so that you can
recognise and handle risks early.
It is simple to use, but that does
not change the fact that hazards could happen. Fast intervention
can prevent serious injury and damage to the property.

Do not overreach or stand on an unstable support. Keep
effective footing and balance at all times.

Before any work (such as transport, construction, conversion,
cleaning or maintenance) and when the product is not being used,
disconnect it from the power supply and empty the paint
container.
SPRAY GUN SAFETY WARNINGS
IBL SG60-26