6
Hot parts can cause severe burns
. Do not touch hot parts
bare handed. Allow cooling period before working on gun
or torch.
Overuse can cause overheating;
Allow cooling period
and follow rated duty cycle. Reduce the current before
starting to weld again. Do not block or filter airflow to unit.
High-frequency due to welding can cause interference
,
it can interfere with radio navigation, safety services,
sensors computers, and communications equipment.
Be sure all the equipment in the welding area is
electromagnetically compatible. To reduce possible interference,
keep weld cables as short as possible, close together, and down low,
such as on the floor. Locate welding operation 100 meters from any
sensitive electronic equipment.
Moving parts can cause injury
. Keep away from moving
parts such as fans. Keep all doors, panels, covers, and
guards closed and securely in place.
Welding wire can cause injury;
Do not press gun
trigger until instructed to do so. Do not point gun
toward any part of the body, other people, or any metal
when threading welding wire.
Electo-static discharge can damage printed circuit
boards
. Put on grounded wrist strap before handling
boards or parts. Use proper static-proof bags and boxes
to store, move, or ship PC boards.
FURTHER CASES
MMA WELDING MACHINES
Summary of Contents for IBL M200-89
Page 1: ......
