iBell CS85-71, Operator'S Manual

Page: 12 / 18

11
For bevelling (angle cutting), follow the steps below:

Loosen the bevel locking knob (12) on the bevel scale plate (5) on
the front of the base plate.

Tilt the body of the tool until the required angle (0°-45°) is
reached using the bevel scale as a guide.

Pre-set stops are available at 0°,15°,30° & 45° for quick, accurate
bevel settings.

Tighten the bevel locking knob to secure the base plate.

Loosen the locking knob on the depth guide and move the base
plate for correct placement.
5
12
I
II
IBL CS85-71
WARNING!
Disconnect plug from power supply before
making any adjustments to the tool.
To start the saw, simply press the trigger
switch (7). Tool speed is increased by
increasing pressure on the switch trigger.
For continuous operation, press the lock
on button (8) as well. Release the trigger
switch to stop.
ON/OFF TRIGGER SWITCH & LOCK BUTTON
7
8