9
▪
Connect the welding tongs (grounding clamp and electrode
holder) correctly according to the figure. Firstly, make sure that
cable, welding tongs and quick plugs are connected reliably.
▪
Connect the
electrode holder
in the quick socket with the
polarity of
‘
+
’
, and then tighten it; suitable electrode is connected
to the holder.
▪
Connect the
grounding clamp
into quick socket with the polarity
of
‘
-
’
, tighten it by force; the grounding clamp connects to the
work-piece.
MMA ASSEMBLY
Work piece
WARNING!
Make sure that welding cable and earth cable
connections are tight. If a connection is slack, it will result in
voltage drop that will cause the connection to heat.
INSTALLATION
Electrode holder
Earth clamp
IBL T220-105 | 250-106
(*Reverse polarity is acceptable)
